Scientific Industrial Lab Equipments in this Category:
PLANT GROWTH CHAMBERS
Inside made of Anodized Aluminium outside Mild Steel with epoxy powder coating
fitted with cooling, heating and lighting arrangement.Above Growth chamber is complete with Humidity control from 55% to 95% at cool temperature.
Temperature range 5°C to 50°Cti °C Temperature can be obtained from 15°C to 50°C±1 °C when all lights from two sides and top are `ON'Temperature
is controlled by DUAL temperature electronic Digital Temperature Controller-cum-indicator to set two temperature for day and night.
Light intensity can be adjusted by controller according to requirement and Humidity shall be controlled
by Humidistat. complete with 0-24 hrs.Timer.
SIZE INSIDE CHAMBER (STAINLESS STEEL 304 OLTY)
W H D
875 x 550 mm
900 x 775 mm
PGC - 3
825 x 1200 x 825
30 cu . ft.
PGC - 4
900 x 1720 x 800
45.8 cu . ft.
PLANT GROWTH CHAMBERS (LARGE)
A versatile controlled Environment Chamber useful for plant Growth & Animal Studies.
This Chamber provides the necessary light, enclosed humid atmosphere and warmth for successful plant growth in a laboratory.
Suitable for investigation in the eftect of day light on flowering cycle, growth rate etc. The Chamber is double walled insulated
with 75mm thick super glass wool between interior and exterior walls.
Outer chamber is made of Mild Steel and finished with durable epoxy powder coating paint.
The inner chamber is made of stainless steel 304 Olty.
The chamber shall have full view inner acrylic door which will allow inspection of samples without
disturbing the temperature of working chamber.
The plant growth chamber shall be mounted on casters for smooth shifting of chamber from one place to
another. the chamber shall be supplied with three number .heavy duty stainless stee! shelves. Viewing window having dimension
35cm x 35cm shall be given on the two sides with flourecent tube lights if you want to switch off the tube light natural
light may be given in the chamber from the two sides.
PHOTOPERIODIC SYSTEM : The temperature in the chamber is controlled by dual temperature
micro processed based Electronic Indicator-cum-controlled to regularise the two temperatures one for day and one for night with the help of microprocessed 7 days programmable
Timer. Temperature may be controlled from 15°C to 50°C. In day time when the full lights are on
COOLING SYSTEM :The chamber has cooling system by sealed compressor with all accessories
and fan cooled condensor are fitted at the bottom exactly below the working chamberto give efficient cooled desired temperature.
LIGHTING SYSTEM :The chamber has provision to give light upto 50K Lux (50,000 Lux) from
the top of the chamber. The growth chamber has been made to control the light intensity thus it gives microclimate
radiation stimulated spectrum adjustable 50 K Lux. Light intensity may given on higher side if is required .We give
mixture of light by incandescent lamp fluorescent iamps and sodium vapour lamps.
HUMIDITY CONTROL SYSTEM : Humidity in the chamber is controlled from 55% to 95%
by Humiditistat and injection of water vapour inside chamber thus making the environment in controlled condition. To
work on 220 Volt A.C.5O Cycle Complete with Voltage Stabilizer.
INSIDE CHAMBER (STAINLESS STEEL 304 OLTY)
x 60 x 90 cm
x 120 x 120 cm
240 x 240 x 240
The above growth chamber can be supplied with a PID Controller
which will take out prints of the chamber for the light. Humidity & Temperature set and measured in the interval
of 1 minute to 30 minutes having 8 K memory on your 80 column matrix printer.
We are manufacturers and suppliers of plant growth chamber equipments like Medical
growth chambers equipment, Plant growth chamber large, and Plant Growth chamber small equipments.
We supply you with the superb quality of products. We are also exporter of other important products like laryngoscopes,
surgical disposable, vaccine carrier, orthopaedic implants etc. We are supplying our products in several countries like
Asia, USA, United kingdom, Argentina, France, Italy and many more countries.