The following optional arrangements can be made in each model
of B.O.D. Incubator.
Inside chamber and shelves shall be made of stainless steel 304
QLTY instead of anodized Aluminium at an extra Cost. For 4 cu.ft. For 6.1 cu.ft. For 10 cu.ft.
For 12 cu.ft. For 15 cu.ft.
B.O.D.Incubator with interior illumination with 3 number fluorescent tube
of 60 cm. Length placed vertically along the back wall. Separate on/off switch for tubes and minimum temperature
can be obtained from 10°C to 50°C when all the tubes are on
THIS ARRANGEMENT CANNOT BE MADE IN 4 CU.FT. B.O.D. INCUBATOR
Incubator incorporated with timer 0-24 hours for regulating
cyclic illumination condition fixed on the side of the chamber
at an extra cost.
Incubator for incubation in CO2 /air mixures could be provided
with an inlet nozzel on the side of control panel providing
a means for montoring CO2 or air/CO2 mixtures smiliar nozzle
is provided for montoring CO2 concentration at an extra
Temperature Indicator with PT-100 sensor at an extra cost
instead of ercury thermometer (Recommended for Economy /
control from 55% to 95% by Humidistat can be provided by
natural mist in each B.O.D. Incubator at an extra cost.
ORBITAL SHAKING INCUBATOR-CUM-B.O.D.
temperature range 5°C to 60°C ± to.5°C.
Inside chamber made of stainless Steel outside Mild Steel
with epoxy powder coating paint. Temperature shall be controlled
by electronic digital Indicator-cum-controller. With standard
shaker platform to accommodate 16 flasks of 500ml capacity
& electronic RPM meter with 7 days programme Timer.
Complete with 4 number of 60 cm fluorescent tubes on the
top of inside chamber with voltage stabilizer.
OF SHAKING INCUBATOR : 660W X 5330 X 533H mm.
Additional shaker platform to accommodate. Other Capacity
of Flasks to cost extra
We are sellers of B.O.D incubator products like Super
deluxe automatic incubator, surgical equipments etc. We supply you with the unforgettable quality of products.
We are also manufacturers and suppliers of laryngoscopes, stethoscopes, surgical disposable, vaccine carrier, orthopedic
implants. We are exporting our products in different countries including Asia, USA, Philippines, Saudi
Arabia, Mexico, Singapore Indonesia, France, and Australia.